Firmware Loading outside of Auracle X

If you ever see alternating lights on your iConnectivity interface, you are likely in bootloader mode and needs to load firmware properly to your interface. Lets look at some of the best ways to load firmware to your iConnectivity interface (mioXM, mioXL, PlayAUDIO1U).

Option 1 ( Only for mioXM, mioXL and PlayAUDIO1U )

iConnectivity Firmware Updater app
Mac https://iconnectivitycalgary-my.share... Win: https://iconnectivitycalgary-my.share...

Video of how to load - https://www.youtube.com/watch?v=fS9wxStYB6Y

Instructions: If your device is already in bootloader mode please skip to Step 5

**2) Find your interface. You must be connected via USB DAW port for firmware loading.**

**3) Select your interface in the list.**

4) Click Restart Boot

5) Once you see the alternating lights on the front of your interface you are in bootloader mode. Please Click the Search button to find the device in bootloader mode.

**6) Select your interface in [Boot] from the list.**

7) Click Get Settings

**8) Your page should look like this. You will see the Enable Timeout checkbox be checked.**

9) Click Select File to be able to select the firmware file. ( iconnectivity.com/firmware )

**10) Select the most recent firmware file you’ve downloaded from the iConnecitivty website.**

**11) Notice the Firmware file name by the File text.**

12) Click the Start Update button

13) Status should show starting update. You should see the restarting light sequence on the front of the interface. Device will show alternating bootloader lights and loading lights.